Chemically Active Systems Analysis Engineer

(Multiple states)
Full Time
Engineering
Entry Level

ATA is seeking an engineer interested in applying analytical skills to conduct both research and applied project work involving the design, engineering, and analysis of chemically active systems, including aerothermal, composite manufacturing, and propulsion systems.

LOCATIONS:

This position is available in all of our locations. If you have a preferred location please specify when you apply.

Essential Duties and Responsibilities

  • Perform aerospace and mechanical engineering analysis project work with emphasis on solving problems requiring expertise in analysis of chemically active systems. Applications may include in-flight aerothermal charring and ablation, atomistic modeling of composite material manufacturing processes, reacting flow modeling, and gas-phase or solid/gas chemical kinetic modeling.
  • Participate in and lead IRAD and sponsored research (e.g., SBIR/STTR) in development of novel analytical tools and multiphysics computational methods for chemically active systems. This research may include modeling and analysis of composite thermal protection systems (TPS), material manufacturing, gas-surface chemical kinetics in high-enthalpy environments, combustion, non-equilibrium plume modeling, hypersonic dissociation, and thermal non-equilibrium.
  • Write proposals, technical reports, and papers.
  • Provide results to clients that satisfy quality, cost, schedule, and other project specifications.
  • Prepare and give oral presentations to clients and at technical conferences.
  • Individuals with a strong analytical background in any of the following technical areas are encouraged to apply:
    • Aerothermodynamics and ablation in hypersonic flight environments
    • Atomistic modeling of composite material manufacturing processes
    • Gas-surface chemical kinetics
    • Chemical kinetic mechanism development and reduction
    • Material, thermal, or fluid characteristics of hypersonic flight

Requirements:

  • B.S., M.S., or Ph.D. in Aerospace, Mechanical, Chemical Engineering, or Materials Science with excellent academic record.
  • Strong analytical background in one or more of the following areas: aerothermodynamics, composite material science, material response and ablation, analytical composite manufacturing, reacting flows, or physical chemistry.
  • Willingness to travel and work at client sites.
  • Excellent written and verbal communication skills.
  • Candidate must be a US Person and eligible to access government and Department of Defense classified facilities.
  • Experience with any of the following is a plus:
    • Knowledge of atomistic modeling and molecular dynamics methods.
    • Programming in Python, C++, Fortran, MATLAB
    • Finite element analysis software (Abaqus, NX, ANSYS)
    • Computational fluid dynamics software (STAR-CCM+, Fluent, Loci/CHEM)
Salary Range:
  • Early Career Professionals: $85,000–$125,000 per year

Important Note: Many of our contracts require access to government, defense, and classified information and must meet Export Control compliance requirements and/or involves access to US-only data systems, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

ATA Engineering, Inc., is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law.

If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact an ATA Engineering, Inc., Human Resources Representative at careers@ata-e.com.

Please note: We prefer electronic copies of all documents, but you may also mail them to our San Diego office if necessary. Many of our contracts require access to government, defense, and classified information. We cannot consider your application unless you are a US Person. Once we have reviewed your qualifications, you will be contacted regarding the status of your application.

Human Resources ATA Engineering, Inc.

13290 Evening Creek Drive South San Diego, CA 92128

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.

Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status



Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 07/31/2029
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*